Can I add a Stenger Test in Primus?

Can I add a Stenger Test in Primus?

In Primus there is no dedicated Stenger test, however you may create it in the settings. 

 

Expected functionality: to play Pure Tone in both ears but with different loudness. 

 

  1. Open Primus and go to Tools -> Test Definitions 


 


  2. Open a Pure Tone tab, click Add and select for HTL:

 

 

  1. Change Masking to 2 channel: 

 


 

  1. There you can define the level for each ear. Configure the parameters, name the test and save it. It will ask to restart Primus to apply changes. 

 

  1. Before performing this test, on the measurement window, toggle the checkmark “Locked”. 

 



    • Related Articles

    • E-Learning - Setting up test definitions

      For detailed instructions on any of the below topics, click here to access the Primus Test Definitions Module e-learning course. This course will identify how to set up Tests within Primus for Audiometry, Speech Audiometry and Real Ear Measurement. ...

    • How to share Primus settings from cloud?

      Auidtdata One is a cloud solution that, along with other functionality, allows you to share your Primus Settings Profile and Test Definitions from cloud.  You need to obtain a Cloud license from Auditdata together with your login and password. The ...

    • How do I share Test Definitions over network?

      The customer should do the following steps to share Test Definitions:    Select Test Definitions from the Tools menu and set up the pre-configured tests on your working machine. In order to save your customized test definitions, click Close button ...

    • How do I share Test Definitions from Auditdata Cloud?

      You can share Test Definitions in a very similar way to sharing Primus Settings Profile described in the previous section.  To do this:  ​ Please ensure that you have customized your Test Definitions in Primus under Tools > Test Definitions.  Go ...

    • What is the process for switching transducer cables in Primus?

      Connect the transducer with the original cable – ONLY this transducer – to the Primus unit. In Primus, choose ‘Tools’ → ‘Copy Transducer Data’, and follow the on-screen instructions: Press Next Press Next When ‘Reading plug information..…’ is ...