FAQ
Auditdata SWAP service
Instructions for the proper transducer exchange in place Introduction This document explains how to ensure that the new transducer was recognized by Primus fitting unit. Instructions Connect the Fitting Unit to the PC using the USB cable. Start ...
Printing options in Primus
There are three options to print the audiograms in Primus (two of them permit printing the old audiogram): 1) First option: If you select to print from client screen measurement, it will print the opened audiogram or several (if you select one more ...
Is it possible to create two audiograms on the same graph?
This feature is useful when you need to compare an old audiogram with a new one. Open a measurement window. To the left of the Measurement screen the Test Type panel will be shown and a new test can be added: Click Add measurement and select the same ...
How do I "Copy to New" an audiogram in Primus?
1. When you save the audiogram, Primus still regards it as current and editable. Hence the Copy to New button will not be available for this audiogram. 2. If you open Audiometry tasks, the New based on button will be available. Click it to ...
How to setup GDT in Primus?
Both Primus and your OMS system should work on the same workstation. 1. Open Primus and go to Tools - Settings - Common section. Enable GDT Interface and put in configuration details (please, see the screenshot for the example): 2. Open your OMS ...
What is the process for switching transducer cables in Primus?
Connect the transducer with the original cable – ONLY this transducer – to the Primus unit. In Primus, choose ‘Tools’ → ‘Copy Transducer Data’, and follow the on-screen instructions: Press Next Press Next When ‘Reading plug information..…’ is ...
Can I add a Stenger Test in Primus?
In Primus there is no dedicated Stenger test, however you may create it in the settings. Expected functionality: to play Pure Tone in both ears but with different loudness. Open Primus and go to Tools -> Test Definitions Open a Pure ...
How to do speech audiometry with microphone?
You need to connect the operator microphone to the Left Operator Microphone jack. After this, select Microphone as input source in the top panel of the Speech measurement window. Now when the operator clicks Start and talks into the microphone, ...
How do I share Test Definitions from Auditdata Cloud?
You can share Test Definitions in a very similar way to sharing Primus Settings Profile described in the previous section. To do this: Please ensure that you have customized your Test Definitions in Primus under Tools > Test Definitions. Go ...
How to share Primus settings from cloud?
Auidtdata One is a cloud solution that, along with other functionality, allows you to share your Primus Settings Profile and Test Definitions from cloud. You need to obtain a Cloud license from Auditdata together with your login and password. The ...
How do I share Test Definitions over network?
The customer should do the following steps to share Test Definitions: Select Test Definitions from the Tools menu and set up the pre-configured tests on your working machine. In order to save your customized test definitions, click Close button ...
Is it possible to share Primus settings over a network?
The customers can share their Primus settings from network with other PCs. To share the settings with other users, you need to create a Primus Settings Profile under the following name: NETWORK PROFILE. As most clients use Primus under NOAH, in ...
How can I access support tools in Primus?
Using Help in Primus you can get access to How To Videos - Providing step by step guides to install, use and customise Primus settings. Training videos can also be found here User Manual and Instructions for Use documents - these can be accessed ...