Printing options in Primus

Printing options in Primus

There are three options to print the audiograms in Primus (two of them permit printing the old audiogram):


1) First option: If you select to print from client screen measurement, it will print the opened audiogram or several (if you select one more from history to see the difference). - view Example 1 (one audiogram selected).

For this, you go to Tools > Settings > General > Reporting:

2) Second option: “Print report from measurement screen” permits to print of actual audiograms from the selected module, see the logo, etc (view example 2). It is not possible to print the old audiogram even if you opened it on your screen.

3) Third option: If you need to print the old audiogram in a view of report you may go directly to the print option in the top panel and select the necessary date/dates - multiple choice (view example 3 - single choice):

 




Examples
Example 1


Example 2


Example 3


    • Related Articles

    • Message is displayed "Another instance of application is already running" when opening Primus

      The message appears when Primus has been closed recently and the PC system didn't reflect that (due to low memory). To force quit Primus in such case, please open Task Manager and go to Details tab. Select Audiology.FittingSoftware.Standalone... and ...
    • Technical Instructions for Use & User Manual - Primus

      This document aims to provide instructions on setting up Primus and installing and configuring the Primus software. It also includes essential information on safety measures, maintenance, and calibration. The Fitting Unit is a general term combining ...
    • File - Downloading Primus software

      Mark your calendar for our November release! We're thrilled to announce some transformative changes to our beloved Primus Software! Driven by our commitment to continuously enhance your user experience, we've made significant updates that we're ...
    • Hardware error displayed in Primus

      1. Run hardware diagnostic test Enable Hardware Diagnostic Test in Tools > Settings > General > Common   Start the test under Tools > Hardware Diagnostic Test Select the device (Measurement or Hearing Instrument), all needed parameters, and ...
    • Primus Fitting Unit (PFU) is displayed as Not connected

      The status bar in Primus when device is Not connected: Checklist: Reconnect a USB cable and power supply Try another USB port on the computer Try another USB cable If a connection is via hub/switch, connect directly to the computer Check that the ...