No Bluetooth Radio was found

If you get this message, Symphony cannot detect the Bluetooth radio on your computer. 

1. Open the Task Manager:

         a. Press the CTRL, SHIFT, and ESC keys to open the Task Manager.

         b. Click on the Services tab.

         c. Right-click on Bluetooth Support Service and select Start.

         

• Related Articles

• Uninstalling the Generic Bluetooth Adapter (Win 8)

  1. To uninstall the generic Bluetooth driver:           a. Click on the Windows’ Start Menu button on the Windows’ task bar:           b. Select the Control Panel.           c. Click on the Device Manager:                               d. Click on ...

• Failed Bluetooth Connection

  In some cases, the audiometer may fail to connect due to Bluetooth and/or device readiness. In this case, press the power button on the audiometer again, wait for the slow blinking LED light, and then click on the Connect button a second time. If the ...

• Error P0077 when starting Symphony 1.3

  1. Uninstall Symphony software from Control Panel of Windows. 2. Open this folder: C:\Users\Public\Documents\Otovation Once inside this folder, find and delete the Symphony folder 3. Reboot PC. 4. Make a right click on the Symphony installation file ...

• Lost connection

  The audiometer can lose its connection from Symphony when the Bluetooth signal is either lost or weak. Bluetooth communications are limited to a distance of 30 ft. (~ 10 meters), so the audiometer must be within this range in order to connect to ...

• Patient Communications Not Working

  1. Patient communications is not supported for USB connections and for Amplitude T-series audiometers. 2. If you are using internal Bluetooth, then the type of internal Bluetooth may not be compatible with Symphony. Refer to the Quick Start Guide for ...